رؤى - Energy Storage - # Battery Parameter Inference

PINN Surrogate Models for Li-ion Battery Parameter Inference

Q: How can the PINN surrogate models be further optimized for accuracy in parameter inference?

To further optimize the PINN surrogate models for accuracy in parameter inference, several strategies can be implemented: Increased Data Availability: Increasing the amount of data available for training the PINN models can improve accuracy. More data points covering a wider range of parameter values can help the model better capture the relationships between the internal parameters and the observed responses. Fine-tuning Hyperparameters: Adjusting the hyperparameters of the neural network, such as the number of layers, neurons per layer, activation functions, and learning rate, can significantly impact the model's performance. Fine-tuning these parameters through experimentation and optimization can lead to better accuracy. Regularization Techniques: Implementing additional regularization techniques, such as dropout, batch normalization, or L1/L2 regularization, can prevent overfitting and improve the generalization of the model to unseen data. Hierarchical Training: Utilizing a hierarchical training approach, where the model is trained at different levels of complexity, can help capture the nuances of the data and improve accuracy in parameter inference. Ensemble Methods: Employing ensemble methods by combining multiple PINN models trained with different initializations or architectures can enhance the model's predictive power and accuracy. Feature Engineering: Introducing domain-specific features or transformations of the input data can help the model extract more relevant information and improve its ability to infer parameters accurately.

Q: What are the implications of the identified parameter sloppiness in the Bayesian calibration results?

Parameter sloppiness in Bayesian calibration results indicates that certain parameters are more sensitive to changes in the observed responses than others. This has several implications: Identifiability: Parameters that exhibit sloppiness may be challenging to identify accurately from the observed data alone. The uncertainty in the inferred values of these parameters may be higher, leading to less confidence in the calibration results. Model Complexity: Parameter sloppiness can indicate redundancies or correlations in the model, suggesting that certain parameters may not be necessary or may be interchangeable with others. Simplifying the model by reducing the number of parameters or constraining their relationships could improve identifiability. Model Interpretation: Understanding parameter sloppiness is crucial for interpreting the model and its predictions. It highlights which parameters have a significant impact on the observed responses and which ones have less influence, guiding further model refinement and analysis. Optimization Strategies: Parameter sloppiness can inform optimization strategies in Bayesian calibration, focusing computational resources on the most influential parameters to improve the efficiency and accuracy of the calibration process.

Q: How can the computational efficiency of the calibration procedure be improved for real-time applications?

To enhance the computational efficiency of the calibration procedure for real-time applications, the following approaches can be considered: Reduced Dimensionality: Employ techniques like dimensionality reduction or feature selection to reduce the number of parameters being calibrated, focusing on the most critical ones for the observed responses. Parallel Processing: Utilize parallel processing and distributed computing to speed up the calibration process by running multiple simulations or evaluations simultaneously. Optimized Sampling Methods: Implement advanced sampling methods like Markov Chain Monte Carlo (MCMC) with adaptive sampling strategies to efficiently explore the parameter space and converge to the posterior distribution faster. Approximate Bayesian Inference: Explore approximate Bayesian inference methods that provide a trade-off between accuracy and computational cost, such as variational inference or sequential Monte Carlo methods. Model Surrogates: Develop more efficient surrogate models, like Gaussian processes or reduced-order models, that can approximate the behavior of the physics-based models with lower computational cost. Hardware Acceleration: Utilize GPU acceleration or specialized hardware for neural network training and inference to speed up computations and reduce processing time. By implementing these strategies, the computational efficiency of the calibration procedure can be significantly improved, making it more suitable for real-time applications where quick and accurate parameter inference is essential.

المفاهيم الأساسية

PINN surrogates enable rapid Li-ion battery state-of-health diagnostics through Bayesian parameter inference.

الملخص

This article discusses the development of physics-informed neural network (PINN) surrogates for Li-ion battery models, focusing on the pseudo-2D (P2D) model. The study explores the use of PINNs for parameter inference, highlighting the computational benefits and accuracy in state-of-health diagnostics. The content is structured into sections covering the P2D battery model, training methodologies, hierarchical approaches, and Bayesian calibration for parameter inference.

P2D Battery Model:

Introduction to the P2D model capturing heterogeneous electrode utilization.
Challenges in training PINN surrogates for the P2D model due to complex governing equations.
Implementation of secondary conservation constraints to improve accuracy.

Training Methodologies:

Comparison of different training models including hierarchy, physics loss, and data loss.
Evaluation of accuracy based on data availability and model complexity.

Parameter Calibration:

Application of Bayesian calibration using PINN surrogates for Li-ion battery parameter inference.
Analysis of parameter identifiability and uncertainty in the calibration process.
Comparison of results for noiseless and noisy observation scenarios.

تخصيص الملخص

إعادة الكتابة بالذكاء الاصطناعي

إنشاء الاستشهادات

ترجمة المصدر

إلى لغة أخرى

إنشاء خريطة ذهنية

من محتوى المصدر

زيارة المصدر

arxiv.org

الإحصائيات

A physics-informed neural network (PINN) is developed as a surrogate for the pseudo-2D (P2D) battery model.
Computational speed-ups of ≈2250x for the P2D model are realized using PINN surrogates.
Testing error estimated to ≈2mV for the SPM surrogate and ≈10mV for the P2D surrogate.
Likelihood standard deviation σ chosen to be 2.0 mV for noiseless observation scenario.
Likelihood uncertainty found to be 5.36 mV for noisy observation scenario.

اقتباسات

"Both the PINN SPM and P2D surrogate models are exercised for parameter inference and compared to data obtained from a direct numerical solution of the governing equations."
"The PINN surrogates enable rapid state-of-health diagnostics in Li-ion batteries."
"The hierarchical approach allows for a higher effectiveness of the physics loss in the calibration process."

الرؤى الأساسية المستخلصة من

PINN surrogate of Li-ion battery models for parameter inference. Part II

by Malik Hassan... في arxiv.org 03-27-2024

https://arxiv.org/pdf/2312.17336.pdf

PINN surrogate of Li-ion battery models for parameter inference. Part II

استفسارات أعمق

How can the PINN surrogate models be further optimized for accuracy in parameter inference?

To further optimize the PINN surrogate models for accuracy in parameter inference, several strategies can be implemented:

Increased Data Availability: Increasing the amount of data available for training the PINN models can improve accuracy. More data points covering a wider range of parameter values can help the model better capture the relationships between the internal parameters and the observed responses.

Fine-tuning Hyperparameters: Adjusting the hyperparameters of the neural network, such as the number of layers, neurons per layer, activation functions, and learning rate, can significantly impact the model's performance. Fine-tuning these parameters through experimentation and optimization can lead to better accuracy.

Regularization Techniques: Implementing additional regularization techniques, such as dropout, batch normalization, or L1/L2 regularization, can prevent overfitting and improve the generalization of the model to unseen data.

Hierarchical Training: Utilizing a hierarchical training approach, where the model is trained at different levels of complexity, can help capture the nuances of the data and improve accuracy in parameter inference.

Ensemble Methods: Employing ensemble methods by combining multiple PINN models trained with different initializations or architectures can enhance the model's predictive power and accuracy.

Feature Engineering: Introducing domain-specific features or transformations of the input data can help the model extract more relevant information and improve its ability to infer parameters accurately.

What are the implications of the identified parameter sloppiness in the Bayesian calibration results?

Parameter sloppiness in Bayesian calibration results indicates that certain parameters are more sensitive to changes in the observed responses than others. This has several implications:

Identifiability: Parameters that exhibit sloppiness may be challenging to identify accurately from the observed data alone. The uncertainty in the inferred values of these parameters may be higher, leading to less confidence in the calibration results.

Model Complexity: Parameter sloppiness can indicate redundancies or correlations in the model, suggesting that certain parameters may not be necessary or may be interchangeable with others. Simplifying the model by reducing the number of parameters or constraining their relationships could improve identifiability.

Model Interpretation: Understanding parameter sloppiness is crucial for interpreting the model and its predictions. It highlights which parameters have a significant impact on the observed responses and which ones have less influence, guiding further model refinement and analysis.

Optimization Strategies: Parameter sloppiness can inform optimization strategies in Bayesian calibration, focusing computational resources on the most influential parameters to improve the efficiency and accuracy of the calibration process.

How can the computational efficiency of the calibration procedure be improved for real-time applications?

To enhance the computational efficiency of the calibration procedure for real-time applications, the following approaches can be considered:

Reduced Dimensionality: Employ techniques like dimensionality reduction or feature selection to reduce the number of parameters being calibrated, focusing on the most critical ones for the observed responses.

Parallel Processing: Utilize parallel processing and distributed computing to speed up the calibration process by running multiple simulations or evaluations simultaneously.

Optimized Sampling Methods: Implement advanced sampling methods like Markov Chain Monte Carlo (MCMC) with adaptive sampling strategies to efficiently explore the parameter space and converge to the posterior distribution faster.

Approximate Bayesian Inference: Explore approximate Bayesian inference methods that provide a trade-off between accuracy and computational cost, such as variational inference or sequential Monte Carlo methods.

Model Surrogates: Develop more efficient surrogate models, like Gaussian processes or reduced-order models, that can approximate the behavior of the physics-based models with lower computational cost.

Hardware Acceleration: Utilize GPU acceleration or specialized hardware for neural network training and inference to speed up computations and reduce processing time.

By implementing these strategies, the computational efficiency of the calibration procedure can be significantly improved, making it more suitable for real-time applications where quick and accurate parameter inference is essential.