Optimizing Movable Antenna Arrays for Dynamic Beam Coverage and Interference Mitigation in LEO Satellite Communications

Alapfogalmak

By jointly optimizing the positions and weights of movable antennas in a satellite-mounted array, the beam coverage can be dynamically adjusted to minimize interference leakage while ensuring the minimum beamforming gain over the desired coverage area.

Kivonat

The paper proposes utilizing movable antenna (MA) arrays to enhance the dynamic beam coverage and interference mitigation for low-earth orbit (LEO) satellite communications. The key insights are:

1. Conventional fixed-position antenna (FPA) arrays have limited degrees of freedom in beamforming to adapt to the time-varying coverage requirement of terrestrial users. MA arrays can reconfigure the array geometry via antenna movement, providing more flexibility in beamforming.

2. Given the satellite orbit and coverage requirement, the antenna position vector (APV) and antenna weight vector (AWV) of the satellite-mounted MA array are jointly optimized over time to minimize the average signal leakage power to the interference area, subject to constraints on the minimum beamforming gain, antenna movement feasibility, and constant modulus of AWV.

3. The continuous-time optimization problem is transformed into a discrete-time form, and an alternating optimization (AO)-based algorithm is developed by iteratively optimizing the APV and AWV using the successive convex approximation technique.

4. A low-complexity MA scheme is proposed by using an optimized common APV over all time slots, significantly reducing the antenna movement overhead while achieving comparable interference mitigation performance.

5. Simulation results validate that the proposed MA array-aided beam coverage schemes can substantially decrease the interference leakage compared to conventional FPA-based schemes, while the low-complexity MA scheme can achieve a performance close to the continuous-movement MA scheme.

Statisztikák

The path loss between the satellite and a point (Θ, Φ) on the earth surface is given by ρ(Θ, Φ, t) = ρ0(‖k̄e(Θ, Φ, t)‖2)−γ.
The effective channel gain between the satellite and point (Θ, Φ) is given by h(Θ, Φ, q(t), w(t), t) = ρ(Θ, Φ, t)|a(k(Θ, Φ, t), q(t))Hw(t)|2.
The average beamforming gain over the coverage area at time t is given by G(q(t), w(t), t) = ∫∫(Θ,Φ)∈Ae h(Θ, Φ, q(t), w(t), t)dΘdΦ / ∫∫(Θ,Φ)∈Ae ρ(Θ, Φ, t)dΘdΦ.
The average signal leakage power to the interference area within time interval (0, T] is given by I(q(t), w(t)) = 1/T ∫t∈(0,T] ∫∫(Θ,Φ)∈Ai(t) h(Θ, Φ, q(t), w(t), t)dΘdΦ / ∫∫(Θ,Φ)∈Ai(t) ρ(Θ, Φ, t)dΘdΦ dt.

Idézetek

"By jointly optimizing the antenna position vector (APV) and antenna weight vector (AWV), more flexible beamforming can be achieved by MA arrays as compared to traditional FPA arrays such that the interference leakage of satellites can be more effectively suppressed."
"The superiority of MA arrays over FPA arrays in terms of flexible beamforming has been validated in existing literatures."

Főbb Kivonatok

Dynamic Beam Coverage for Satellite Communications Aided by Movable-Antenna Array

by Lipeng Zhu,X... : arxiv.org 04-25-2024

https://arxiv.org/pdf/2404.15643.pdf

Mélyebb kérdések

How can the proposed MA array-aided beam coverage scheme be extended to handle the dynamic coverage requirement of multiple satellites in the LEO constellation

The proposed MA array-aided beam coverage scheme can be extended to handle the dynamic coverage requirement of multiple satellites in the LEO constellation by implementing a coordinated optimization approach. Each satellite in the constellation can have its own set of movable antennas, and the optimization algorithm can be designed to jointly optimize the antenna positions and weights for all satellites simultaneously. This would involve considering the interference between satellites, the varying coverage requirements of each satellite, and the overall network performance objectives.
By extending the optimization framework to cover multiple satellites, the algorithm can dynamically adjust the beam coverage of each satellite based on its specific requirements and the interference constraints with other satellites. This approach would involve a more complex optimization problem but would enable a holistic optimization of the entire constellation for improved performance and interference mitigation.

What are the potential challenges and limitations in implementing the MA array technology in practical LEO satellite systems

Implementing the MA array technology in practical LEO satellite systems may face several challenges and limitations. Some of these include:

Complexity of Movement: Managing the movement of multiple antennas on each satellite in a dynamic environment can be technically challenging. Ensuring precise control over the antenna positions and movements to optimize beam coverage requires sophisticated control systems.

Power Consumption: The movement of antennas and continuous optimization of beam coverage can lead to increased power consumption. Balancing the need for efficient communication with power efficiency is crucial for satellite systems.

Interference Management: Coordinating the movement of antennas to mitigate interference between satellites in the constellation can be complex. Ensuring that the beamforming strategies do not inadvertently cause interference with neighboring satellites is a key challenge.

Hardware Constraints: Implementing movable antennas on satellites may require additional hardware components, adding weight and complexity to the satellite design. Ensuring the reliability and durability of these components in the harsh space environment is essential.

Real-time Optimization: Performing continuous optimization of antenna positions and weights in real-time to adapt to changing coverage requirements and interference conditions requires efficient algorithms and computational resources.

Addressing these challenges will be crucial in successfully implementing MA array technology in practical LEO satellite systems.

How can the proposed solution be further improved to achieve a globally optimal performance for the satellite beam coverage and interference mitigation problem

To achieve a globally optimal performance for the satellite beam coverage and interference mitigation problem, the proposed solution can be further improved in the following ways:

Enhanced Optimization Algorithms: Utilize advanced optimization techniques such as machine learning algorithms, reinforcement learning, or genetic algorithms to find globally optimal solutions for the complex optimization problem. These algorithms can explore a wider solution space and potentially find better solutions.

Dynamic Adaptation: Develop adaptive algorithms that can dynamically adjust the optimization parameters based on real-time feedback and changing network conditions. This adaptive approach can improve the system's ability to respond to dynamic coverage requirements and interference scenarios.

Integration of AI: Incorporate artificial intelligence (AI) techniques to learn and adapt the beamforming strategies based on historical data and real-time performance metrics. AI can help optimize the system over time and improve its overall efficiency.

Hardware Optimization: Explore innovative antenna designs and technologies that can enhance the performance of the MA arrays while reducing power consumption and hardware complexity. Efficient hardware solutions can contribute to better overall system performance.

By incorporating these improvements, the proposed solution can move closer to achieving globally optimal performance for satellite beam coverage and interference mitigation in LEO satellite systems.