Residual-Based a Posteriori Error Estimators for Algebraic Stabilization Schemes in Convection-Diffusion-Reaction Problems

핵심 개념

This work extends the analysis of residual-based a posteriori error estimators in the energy norm to newly proposed algebraic stabilization schemes for convection-diffusion-reaction problems. Numerical simulations on adaptively refined grids demonstrate the higher efficiency of an algebraic stabilization scheme with similar accuracy compared to an algebraic flux correction scheme.

초록

The content starts by introducing the convection-diffusion-reaction equation and the challenges in numerically approximating its solution, particularly in the presence of layers. It then discusses the recently proposed algebraic stabilization schemes, including the Symmetric Monotone Upwind-type Algebraically Stabilized (SMUAS) method, which satisfies the discrete maximum principle on arbitrary simplicial meshes.
The main focus of the work is on developing residual-based a posteriori error estimators for the algebraic stabilization schemes, extending the analysis previously done for algebraic flux correction schemes. The derivation of the global upper bound for the error in the energy norm is presented, along with the discussion of the local lower bound.
Numerical studies are then provided, comparing the performance of the SMUAS method with the algebraic flux correction scheme using the BJK limiter. The results show that both methods achieve optimal convergence rates, but the SMUAS method is significantly more efficient in terms of the number of nonlinear iterations and rejections required to solve the system of equations.
The paper concludes by summarizing the key findings and highlighting the potential for further numerical studies of the different algebraic stabilization schemes on adaptively refined grids.

통계

ε = 10^-3
b = (2, 1)^T
c = 1
g = 0
uD = 0
f is chosen such that the exact solution is u(x, y) = y(1-y)((x-e^((x-1)/ε))/(1-e^(-1/ε)))

인용구

"This work extended the analysis of [6] to the class of new algebraic stabilization schemes, which encompasses the MUAS [9] and the SMUAS [10] method."
"Numerical tests were performed to compare the SMUAS method with the AFC scheme using the BJK limiter. It was observed that both the methods are accurate, and the errors are comparable, but the SMUAS method is much more efficient compared to the BJK limiter."

핵심 통찰 요약

Residual-Based a Posteriori Error Estimators for Algebraic Stabilizations

by Abhinav Jha 게시일 arxiv.org 04-04-2024

https://arxiv.org/pdf/2404.02804.pdf

더 깊은 질문

How do the different algebraic stabilization schemes, such as MUAS and SMUAS, compare in terms of their theoretical properties and practical performance on a wider range of test problems?

The algebraic stabilization schemes, including MUAS and SMUAS, have distinct theoretical properties and practical performance characteristics.

Theoretical Properties:

MUAS: The Monotone Upwind-type Algebraically Stabilized (MUAS) method, as proposed in the literature, aims to provide stability and accuracy by incorporating specific limiters to control the solution behavior near layers. It satisfies the Discrete Maximum Principle (DMP) and is designed to handle convection-dominated problems effectively.
SMUAS: The Symmetric Monotone Upwind-type Algebraically Stabilized (SMUAS) method is a more generalized approach that builds upon the MUAS method. It further refines the stabilization techniques to ensure linearity preservation and DMP satisfaction on arbitrary meshes.

Practical Performance:

MUAS: While MUAS is effective in handling convection-dominated problems and maintaining stability, it may have limitations in terms of computational efficiency and accuracy on certain types of meshes.
SMUAS: SMUAS, being a more advanced version, tends to offer improved computational efficiency and accuracy compared to MUAS. It has shown optimal convergence rates on non-Delaunay meshes and has demonstrated superior performance in terms of solving the system of nonlinear equations efficiently.

In practical applications, the choice between MUAS and SMUAS would depend on the specific problem characteristics, mesh considerations, and the desired balance between accuracy and computational efficiency.

What are the potential limitations or drawbacks of the residual-based a posteriori error estimators developed in this work, and how could they be further improved or extended?

The residual-based a posteriori error estimators developed in this work offer valuable insights into the error analysis of algebraic stabilization schemes. However, they may have some limitations and potential drawbacks:

Sensitivity to Stabilization Parameters: The estimators may be sensitive to the choice of stabilization parameters, such as the limiters in the algebraic stabilization schemes. Variations in these parameters could affect the accuracy and reliability of the estimators.

Computational Cost: The computational cost of computing the residual-based estimators, especially on adaptively refined grids, could be significant. This may limit their practical utility in real-time or large-scale simulations.

Edge Estimation Accuracy: The approximation of edge estimates in the estimators could introduce errors or uncertainties, impacting the overall reliability of the error estimates.

To improve or extend the residual-based estimators:

Refinement Strategies: Implement more sophisticated refinement strategies to enhance the accuracy of error estimates, especially in regions with steep gradients or layers.
Incorporate Mesh Adaptivity: Develop adaptive strategies that dynamically adjust the mesh based on error estimates to focus computational resources where they are most needed.
Enhanced Stability Analysis: Conduct further stability analysis to ensure the estimators are robust and reliable across a wider range of problem settings.

What other types of a posteriori error estimators could be explored for algebraic stabilization schemes, and how might they provide additional insights or advantages compared to the residual-based approach?

Exploring alternative types of a posteriori error estimators for algebraic stabilization schemes could offer new perspectives and advantages over the residual-based approach:

Hierarchical Error Estimators: Hierarchical error estimators, such as those based on multigrid or adaptive mesh refinement techniques, could provide a more detailed and adaptive assessment of errors at different levels of mesh refinement. This could lead to more efficient error control and mesh adaptation strategies.

Goal-Oriented Error Estimators: Goal-oriented error estimators focus on quantifying errors in specific quantities of interest rather than the global error. By targeting specific output quantities, these estimators can guide adaptive mesh refinement towards improving the accuracy of key solution features.

Model-Adapted Error Estimators: Model-adapted error estimators tailor error assessments to the specific characteristics of the underlying physical model. By incorporating domain-specific knowledge and model properties, these estimators can offer more accurate error predictions and refinement strategies.

By exploring these alternative error estimation approaches, researchers can gain deeper insights into the performance of algebraic stabilization schemes, optimize computational resources, and enhance the overall accuracy and efficiency of numerical simulations.