Optimizing Automated Driving Safety, Comfort, and Efficiency through Prediction Horizon Analysis

Khái niệm cốt lõi

The choice of prediction horizon can significantly impact the safety, comfort, and efficiency of automated vehicles. This study explores the relationship between different prediction horizons and vehicle-level performance to determine the minimum required and optimal prediction horizons for specific automated driving applications.

Tóm tắt

This study investigates the impact of different prediction horizons on the safety, comfort, and efficiency of automated vehicles (AVs) in scenarios involving crossing pedestrians. The authors first select relevant scenarios based on accident data and pedestrian walking studies. They then integrate typical AV modules, including perception, prediction, and planning, into a simulation environment to evaluate vehicle-level performance metrics across a range of prediction horizons.

The results show that a prediction horizon of 1.6 seconds is required to prevent collisions with crossing pedestrians, horizons of 7-8 seconds yield the best efficiency, and horizons up to 15 seconds improve passenger comfort. However, longer horizons also increase the computational load, negatively impacting the AV's performance.

The authors propose a framework to determine the required and optimal prediction horizons based on the specific AV application and its performance goals. They demonstrate the versatility of this framework by introducing four distinct use cases, each with different weighting of safety, comfort, and efficiency. The overall recommended prediction horizon for AVs operating in environments with crossing pedestrians is 11.8 seconds.

The study highlights the importance of considering the impact of prediction horizons on the overall AV system, rather than just evaluating prediction accuracy in isolation. The authors also note that their conclusions are limited by the assumption of perfect predictions and the use of a single trajectory planner, suggesting the need for further research to explore the effects of prediction inaccuracies and the integration of different planning approaches.

Thống kê

The maximum and minimum mean travel time delay and their respective prediction horizons are:
Maximum travel time delay:
SC1: 10.6% at 2 seconds
SC2: 15% at 1.8 seconds
SC3: 17.5% at 1.8 seconds
Minimum travel time delay:
SC1: 7.5% at 8 seconds
SC2: 9.4% at 7 seconds
SC3: 9.8% at 8 seconds

Trích dẫn

"Predicting the future movements of surrounding road users is essential for enhancing the performance of an automated vehicle (AV). However, the degree to which these predictions influence the AV's behavior is unknown."
"Our results indicate that a prediction horizon of 1.6 seconds is sufficient for avoiding collisions with crossing pedestrians in urban settings. Optimal travel time efficiency is achieved with longer horizons of 7-8 seconds, while predicting up to 15 seconds improves comfort."
"In this work we show that selecting a single optimal prediction horizon is not possible, as the best choice depends on the desired balance between different metrics and scenarios."

Thông tin chi tiết chính được chắt lọc từ

Prediction Horizon Requirements for Automated Driving

by Manu... lúc arxiv.org 04-11-2024

https://arxiv.org/pdf/2402.03893.pdf

Yêu cầu sâu hơn

How would the results change if the prediction models were not assumed to be perfect, but instead had varying levels of accuracy

If the prediction models were not assumed to be perfect and instead had varying levels of accuracy, the results would likely show a different relationship between prediction horizons and AV performance metrics. Inaccurate predictions could lead to more collisions, reduced comfort, and decreased efficiency. The required and optimal prediction horizons would shift towards shorter horizons to mitigate the impact of inaccuracies. The trade-offs between safety, comfort, and efficiency would become more pronounced, as the AV would need to balance the risks associated with inaccurate predictions while still aiming to optimize performance metrics.

What are the potential trade-offs between safety, comfort, and efficiency if the AV is required to operate in a wider range of scenarios beyond just crossing pedestrians

Operating the AV in a wider range of scenarios beyond just crossing pedestrians would introduce additional complexities and potential trade-offs between safety, comfort, and efficiency. For example, scenarios involving high-speed highways, complex intersections, or adverse weather conditions would require different prediction horizons to ensure safety and efficiency. In such scenarios, the AV may need to prioritize safety over comfort, leading to more conservative driving behavior. This could result in longer travel times and reduced efficiency to accommodate the higher safety requirements. Balancing these trade-offs would be crucial in designing a versatile AV system capable of adapting to diverse driving conditions.

How could the framework be extended to consider the impact of prediction horizons on the energy consumption and environmental impact of automated vehicles

To consider the impact of prediction horizons on the energy consumption and environmental impact of automated vehicles, the framework could be extended by incorporating additional metrics related to energy efficiency and emissions. By analyzing how different prediction horizons affect the AV's acceleration patterns, braking frequency, and overall driving behavior, it would be possible to estimate the energy consumption associated with each horizon. This analysis could help identify the optimal prediction horizon that minimizes energy usage while maintaining safety and comfort levels. Furthermore, by integrating environmental impact assessments into the framework, such as calculating the carbon footprint of the AV's operations based on different prediction horizons, it would be possible to optimize AV performance not only in terms of safety and comfort but also in terms of sustainability and environmental responsibility.