The Role of Control Frequency in Learning-Based Sampled-Data Control of Uncertain Systems

Khái niệm cốt lõi

Optimizing control frequency is crucial for stability and performance in learning-based control systems.

Tóm tắt

Learning models or control policies from data can enhance uncertain systems' performance. Feedback is essential despite data quality. Control frequency impacts stability and performance, often overlooked. Gaussian processes aid in learning continuous-time models for sampled-data control. Robust stability conditions are derived to optimize control frequency. Increasing data or control frequency improves system performance. Real-world systems like robots benefit from considering control frequency as a design parameter.

Thống kê

Minimum control frequency required for stability: 18 Hz
Tradeoff between model uncertainty and amount of training data: High uncertainty requires more data points.
Impact of increasing control frequency by 33%: Reduces the number of data points needed by half.

Trích dẫn

"We show that there is a tradeoff between the two design parameters in terms of stability and performance."
"As illustrated in Fig. 2 and Fig. 4, the amount of data required for stability or achieving a specific performance depends on the frequency at which we can run the controller."
"Stable regulation of the quadrotor is achieved for all simulated initial conditions, even when operating at the MCF."

Thông tin chi tiết chính được chắt lọc từ

Is Data All That Matters? The Role of Control Frequency for Learning-Based Sampled-Data Control of Uncertain Systems

by Ralf... lúc arxiv.org 03-15-2024

https://arxiv.org/pdf/2403.09504.pdf

Yêu cầu sâu hơn

How does increasing the control frequency impact energy efficiency?

Increasing the control frequency can have both positive and negative impacts on energy efficiency. On one hand, a higher control frequency allows for more frequent adjustments to the system's inputs, leading to better tracking of desired trajectories and improved performance. This enhanced performance can result in smoother operation, reduced overshoot, and faster settling times, which may lead to overall energy savings by optimizing the system's operation.
However, on the other hand, increasing the control frequency requires more computational resources and faster data transmission rates. This increased demand for processing power and communication bandwidth can potentially lead to higher energy consumption in systems with limited resources or those operating under strict power constraints. Therefore, while higher control frequencies can improve performance, they may also come at the cost of increased energy consumption.

What are potential drawbacks of relying solely on increasing data points for system improvement?

Relying solely on increasing data points for system improvement has several potential drawbacks:

Diminishing Returns: As more data points are collected, there may be diminishing returns in terms of improving model accuracy or controller performance. The marginal benefit of each additional data point decreases as the dataset grows larger.

Computational Complexity: Handling large datasets requires significant computational resources for storage, processing, and analysis. This complexity can hinder real-time decision-making processes or increase latency in feedback loops.

Overfitting: Increasing data points without proper regularization techniques or model validation can lead to overfitting. Overfit models perform well on training data but generalize poorly to unseen test cases.

Data Collection Costs: Collecting a large amount of high-quality training data is often time-consuming and expensive. It may involve extensive experimentation or sensor deployment efforts that add logistical challenges and costs.

5 .Model Interpretability: A vast amount of raw data might make it challenging to interpret how specific features contribute to system behavior or decision-making processes.

How can real-time adjustments to control frequency affect overall system adaptability?

Real-time adjustments to control frequency play a crucial role in enhancing overall system adaptability by allowing dynamic responses based on changing operational conditions:
1 .Adaptation: Real-time adjustment enables systems to adapt quickly to varying environmental factors such as disturbances or uncertainties without manual intervention.
2 .Optimization: By dynamically modifying the control frequency based on current requirements (e.g., workload variations), systems can optimize their performance while maintaining stability.
3 .Fault Tolerance: Systems with adaptive control frequencies are more resilient against faults or failures as they can adjust parameters autonomously during runtime.
4 .Resource Management: Adaptive control frequencies help manage resource allocation efficiently by scaling up/down computational tasks according
to immediate needs.
5 .Performance Enhancement: Fine-tuning the control frequency in real time allows systems
to achieve optimal trade-offs between responsiveness,
stability,
and efficiency depending
on situational demands
Overall,
real-time adjustments
to
control
frequency enhance a system's flexibility,
robustness,
and agility,
making it better equipped
to handle diverse operating scenarios effectively